Unison
|
Picture
|
Description
|
Price
|
|
Unico CDP Hybrid CD Player
Circuit Topology: Fully Balanced, Triode Differential Stages, Class A
Valves: 1 ECC82 (12AU7)
D/A Converter:CRYSTAL CS4392
Digital Interface:Crystal CS8414 Reduced Clock Jitter Audio Data Correction Check
Oversampling:CS8420 24BIT/96kHz
Digital Outputs:S-PIF, Unbalanced
Dimension (w x d x h): 17.2x13.4x3.7 inch
Net Weight: 20 lbs
Wood Remote Control ($150)
|
$1,850
|
|
Unico CD Hybrid CD Player
Circuit Topology:: Fully Balanced, Triode Differential Stages, Class A
Valves: 2xECC82 (12AU7)
D/A Converter::CRYSTAL CS4392
Digital Interface:Crystal CS8414 Reduced Clock Jitter Audio Data Correction Check
Oversampling:CS8420 24BIT/96kHz
Digital Outputs:UNBALANCED/BALANCED
Dimension (w x d x h): 17.2x13.4x3.7 inch
Net Weight: 25 lbs
Wood Remote Control ($150)
|
$2,850
|
|
|
Unico P Hybrid Integrated Amplifier
Output Stage:Symmetrical Complementary Power MOSFET
Output power: 50 WPC into 8 Ohm, 95 WPC into 4 ohm
Valve complement: 1 x ECC82(12AU7)
|
$1,575
|
|
Unico Hybrid Integrated Amplifier
Stereophile Class B Component
The combination of a pure triode input stage with a MOSFET output stage provides 80 watts of power together with the pleasing sonic character of a well-designed tube amplifier. It will appeal to music lovers and audiophiles alike for its convincingly natural musical presentation.
Output power: 80 watt per channel
Outup impedance: 4 - 8 Ohm
Bandwidth: 5 Hz - 50 kHz at + 0.I dB
Input impedance: 50 kOhm / 47 pF
Input stage: 2 x twin triode ECC82
Output Stage: Improved dynamic class A symmetrical with power MOSFET complementary pair
|
$2,250
|
|
Unico SE Hybrid Integrated Amplifier with Phono
Stereophile Class A Component
The Unico SE version offers 140 W on 8 ohm, and improve the extension in frequency over the standard Unico. On Board MC/MM Phono Stage built in.
With 4 MOS-FET per channel as double the output over the Unico, we have increase the capability of the filter and more power on driver stages.
|
$3,150
|
|
Unico 200 Hybrid Integrated Amplifier with Phono
UNICO 200 integrated hybrid amplifier of more of 250W per channel, with six pairs of MOSFET per channel. The input selection is carried out with signal relays sealed in azote atmosphere and gold contacts. It uses ALPS rotary potentiometer.
Output power: 200 watt per channel
Outup impedance: 2 - 16 Ohm
Bandwidth: 5 Hz - 50 kHz at - 0.1 dB
Input impedance: 50 kOhm / 47 pF
Input stage: 2 x twin triode ECC82
Output Stage: Improved dynamic class A symmetrical with power MOSFET complementary
Damping factor: > 50
Total feedback factor: 10 dB
THD: < 0.1% at max power
Power consumption: 1200 watt maximum
Dimensions: 17.6x21.8x10.5 inches
Net weight: 135 lbs
|
$7,250
|
|
Unico PRE Hybrid Preamplifier with Phono
UNICO PRE is a versatile and fine - sounding preamplifier based on hybrid valve and mosfet technology. Although designed as the natural partner for Unison Research Unico DM dual mono power amplifier, it will give excellent results with virtually any good quality power amplifier. The fully solid-state input stage uses J-Fet technology, whilst line level amplification is entrusted to three twin-triode valves. A phono stage is built-in, which is also fully solid-state using low-noise op-amps designed specially for audio use to give excellent performance on vinyl replay. RIAA equalization is active for the low frequency band and passive for the high frequency band. The phono stage will cater for both MM and MC cartridges, including those with low (i.e. less than 0.5mV) output.
|
$4,150
|
|
Unico DM Hybrid Amplifier
Unico DM is a dual-mono power amplifier using both valves and mosfets. It combines the sweetness and sonic purity of a valve input stage with a high power output stage to give complete control over any loudspeaker. Unico DM has also been designed for maximum versatility.
It can be switched to mono to give 500 watts, and can be used in a multi-unit system in which power linking and switching are taken care of automatically.
Twin triode ECC82 signal valves are used in the input stage and give to DM its convincingly natural sound quality. The output stage employs two pairs of complementary mosfets per channel to provide a generous 150 watts of power.
Balanced (XLR) and unbalanced input connectors are provided, with the possibility of simultaneous operation. In bridged mode (mono) either balanced or unbalanced inputs may be used as required.
|
$4,150
|
|
|
Unison Simply Two Anniversary Integrated Stereo Tube Amplifier
Output Stage: single-ended, ultralinear, Class-A
Output power: approx. 10 watt per channel
Valve complement: 2 x ECC82(12AU7), 2 x EL34
|
$2,995
|
|
|
Unison S2K Integrated Stereo Tube Amplifier
Output Stage: single-ended, ultralinear, Class-A
Output power: approx. 15 watt per channel
Valve complement: 2 x ECC82(12AU7), 2 x KT88
|
$3,395
|
|
|
Unison S8 Integrated Stereo Tube Amplifier
Output Stage: single-ended Class-A
Output power: approx. 24 watt per channel
Valve complement: 3 x ECC82(12AU7), 2 x 845
|
$7,695
|
|
|
Unison MYSTERY TWO StereoTube Preamplifier
Operating mode: Class-A
Inputs: 4 line RCA, 1 tape
Outputs: 2 line, 1 tape
Valve complement: 1 x EZ81 rectifier, 3 x ECC83(12AX7)
|
$4,195
|
|
|
Unison SMART 845 Mono Tube Amplifier
Output Stage: single-ended, Class-A
Output power: approx. 24 watt
Valve complement: 1 x ECC82(12AU7), 1 x ECC83(12AX7), 1 x 845
|
$9,495/pr
|
|
|
Unison Symply Phono RIAA Phono Tube Preamplifier
Operating mode: Class-A
Gain: 52dB
Selectable Input impedances: 47k-100Ohm-50Ohm-22Ohm/100pF
Valve complement: 3 x ECC83(12AX7)
|
$1,595
$2,195 w/ outboard PS
|
|