Accessories
|
|
|
ISOLATION PLATFORMS
|
VPI Classic - Plinth top $295, Table Top $345 Free shipping
VPI Scout/Scoutmaster - Plinth top or Table Top $295 Free shipping
VPI SuperScoutmaster - Plinth top or Table Top $325 Free shipping
VPI Aries - Plinth top $325, Table Top $395 Free shipping
VPI TNT - Plinth top or Table Top $395 Free shipping
VPI HRX - $395 Free shipping
Please call for other turntable manufacturer's pricing and availability
|
Gingko Audio - Cloud9S Isolation Platform
Designed to perfectly match with VPI Scout and ScoutMaster series turntable.
Regular price $299 now only $279 Free shipping
|
 STRING SUSPENSION CONCEPT (SSC) Classic base utilizing a Diacron string suspension mode. Diacron is characterized by a high consistency, resilience and longevity. Two solid wood frames are joined by a special string construction. The strings prevent any sound reducing resonance. CD players especially benefit. Besides the sound improvements there is also an improvement with video components creating more contrast and a more stable picture. All SSC products are engineered and produced in Germany.
SCS Basis Classic base. Solid beech frame. Available in Black Ash or Beech wood finish.
Max load: 60 kg or 130lbs. Dim: 17.3" W x 14.2" D x 2.4"H. Reg price $620, on-line price $595 
|
 SSC TRIPLEBASE (Black or White finish) is suitable for amplifiers, loudspeakers, turntables and CD players. Max Load: 180 kg. Measurements: 25.5" W x 18.5"D x 3.5"H
Reg $700, on-line price $675 
|
 SSC FLATBASE Black - This new model from SSC can be used in very small spaces due to its compact construction. Because of the many SSC elements placed at its bottom side, the SSC Flat base attains very full-sounding results producing extended, more concise bass and enhanced dynamics. Flat base is ideal for solving problems with Subwoofer. Annoying boom will be reduced or fully eliminated to maximize sound quality. The carbon designed scratch resistant surface perfectly compliments any component. It is also available in foiled wood. If desired, custom and special dimensions are available. Material: wooden plate carbon foiled. Load carrying: 50 kg. Dim: 17.3" W x 14.2" D x 1" H. Black $265 or Silver $295 
|
PS AUDIO Accessories
|
Power Port Premier is PS Audio's very best high-end AV grade receptacle that will make a significant contribution to your system’s performance. Superior to the classic Power Port, the Premier is a major step forward in both performance and technical achievement . $95 ea. 
PS Audio’s Power Port is a high-end AV grade AC receptacle that will make a significant contribution to your system’s performance. It is intended to replace the cheap brass receptacles found in nearly every home in any country. The Power Port™ is a custom built, isolated ground, 15 to 20 amp receptacle that will insure a life-long level of excellence. The Power Port exceeds hospital grade for grip strength, contact resistance and current delivery. Easy to install in your wall, this is one component you need in your listening room. $44.95 ea. 
Noise Harvester is the world’s only device that actually eliminates line noise from the home’s power lines. Filters and conditioners either shuffle the line noise away or provide some isolation for equipment, but they do NOT eliminate or remove power line noise. Only the Noise Harvester removes line noise and converts it to another form of energy, light! Give your power conditioner a fighting chance by lowering the noise floor of the power line in the first place. The Harvester makes a significant improvement.
$95 ea. or $199 for 3 
 The Soloist is the only in-wall full featured power conditioner made. Surge and spike protection as well as full zero-restriction AC filtering. Use Soloist as the first step in building your AC power foundation. Perfect behind on-wall plasma or LCD televisions, or to feed anything in your listening room or home theater. $195 ea . We have one opened box brand new for sale at $174.99 
Soloist Premier Special Edition Power conditioning and AC protection right where it belongs; your wall socket. This is not just the Soloist, but a limited edition Soloist built around the Power Port Premier AC receptacle. Each of these are hand built and hand tweaked for best performance. Limited run of only 200 pieces because of the extremely low price and when they're gone, that's it. The special edition Soloist premier is only $50 higher than a standard Soloist but with the addition of a $100 Power Port Premier, hand installed and tweaked. The Soloist is the only in-wall full featured power conditioner made. Surge and spike protection as well as full zero-restriction AC filtering. Use the Soloist Premier as the first step in building your AC power foundation. Perfect for feeding a Premier, power amp, or to feed anything in your listening room or home theater. $249 Free shipping
|
Cold Ray Resonance and Vibration Control Feet
 Developed by industry professional LARS KRISTENSEN, world reknown for his advancements and achievements in High End Audio Systems with over 35 years of experience.
 Cold Ray consists of three separate parts: a steel base cone, a ball bearing (which comes in either steel or ceramic) and an aluminum cover bell. The cover bell together with the ball bearing serve as the resonators, greatly limiting the amount of resonance that can pass through Cold Ray. It is unlike other decoupling devices because it is not, in fact, a decoupling device, but rather a resonator, absorbing sympathetic “ringing” that otherwise clutters up and interferes with the TRUE sound of your HiFi components.
PLACEMENT
 For optimal results place 3-4 Cold Ray pieces under the spots with the greatest mass concentration
in your components/speakers (in most cases these spots are located under heat sinks and transformers).
 At times it may be necessary to use more than 4 pieces, most commonly under components with heavy
and/or delicate transports (CD players, turntables, etc.).
 Recommended for use on hard surfaces.
 Use under video components for sharper contrast and more natural color.
Cold Ray Specifications
38mm in height and 38mm in diameter.
66.5 grams ( 2.35 ounces).
 Sets of Base Cones and Cover Bells come in 2 varieties:
- Black with Ceramic Ball Bearings (excellent vibration
control and resonance dampening properties).
- Silver with Steel Ball Bearings (high vibration/resonance
control and more economical).
 Vertically stabilizing design. Cold Ray becomes more stable when bearing
a greater weight.
 Each Cold Ray supports up to 200 lbs weight!
|
Benefits of Cold Ray on your sound and video systems
 Greater separation between your system and the environment, eliminating many unwanted sonic artifacts
and enabling your system to perform at its optimal level.
 Unique “Vertical Stability” design allows for greater stability with larger weight loads. Incredible mechanical
solidity.This is different from other decoupling devices which become less stable as weight exposure increases.
 Greater sonic detail through an enhanced and expanded sound stage, tonal balance, and overall stability
of frequencies.
 Tighter bass response, cleaner mid-range, and more focused highs allowing for greater separation of instruments
and voices within the sound-field.
 An extremely easy and cost effective way to vastly improve any sound or video system.
 Choice of either ceramic (more absorbent) or steel ball bearings to fit any budget.
Purchase online and get Free shipping
ColdRay Silver (set of 4) w/ Steel Ball Bearing
|
Introductory price $315 
|
ColdRay Silver (set of 3) w/ Steel Ball Bearing
|
Introductory price $235 
|
ColdRay Black (set of 4) w/ Ceramic Ball Bearing
|
Introductory price $470 
|
ColdRay Black (set of 3) w/ Ceramic Ball Bearing
|
Introductory price $350 
|
|
TENDERFEET,TENDERCUP
|
 Tenderfeet are solid anodized aluminum cones designed to fit underneath your audio components. They mass-load your equipment to whatever they are placed on, and provide a high impedance mechanical interface between the surface on which the equipment rests and the equipment itself. This prevents ambient vibration from affecting the performance of loudspeakers, turntables, compact disc players and electronics. With loudspeakers this ambient vibration can be the delayed, self-generated standing wave present in the floor or bookshelf that the loudspeaker rests on. With turntables and electronics this vibration is largely loudspeaker generated.
Tenderfeet prevent loudspeakers from rocking which dramatically increases resolution at higher frequencies, and also increases the clarity and definition of bass notes. Tenderfeet will enhance spatial accuracy and reduce the boxiness associated with smaller speakers. Focus of separate instruments will improve. Increased low level detail will be more apparent, especially in the attack of stringed instruments — and the increased sense of "air" around instruments and vocals.
The greatest improvement will be heard with loudspeakers, then in turntables, tube electronics and transistor electronics in that order. Power amplifiers seem to benefit more than preamps.
Tenderfeet come in two sizes. The small ones are only 15mm high and will fit under turntables, electronics or loudspeakers mounted on hard surfaces. The large size are 37mm high, to be used on loudspeakers or electronics placed on carpeted or hard floors. The long, sharper taper will pierce carpet, thereby coupling the component solidly to the floor. Both sizes are available in a black or silver anodized finish that will not tarnish or discolor. The large Tenderfeet come standard with a 8-32 threaded hole which will accept hanger bolts for screwing to your equipment. Large Tenderfeet are also available with larger 1/4-20 threads. All Tenderfeet are 34mm diameter at the base.
We recommended threeTenderfeet for each piece of equipment. For larger loudspeakers, we recommend four Tenderfeet fitted with hanger bolts for leveling, or our adjustable Spike Feet (Type I for surface mount, Type II for flush mount). For those who want the benefit of Tenderfeet or Spike Feet without the possibility of scratching fine furniture or floors, we recommend using our Tendercups. 
MODELS AND PRICING
Large Silver Tenderfeet - 8-32 thread
35mm Dia. x 37mm high, threaded 8-32 for optional hanger bolt - see below
|
$15.95 ea
|
Large Black Tenderfeet - 8-32 thread
35mm Dia. x 37mm high, threaded 8-32 for optional hanger bolt - see below
|
$19.95 ea
|
Hanger Bolts - To permit large 8-32 threaded Tenderfeet to be screwed into the bottom of wooden loudspeakers or stands. Wood screw protrudes 5/8".
|
$0.65 ea
|
Large Silver Tenderfeet - 1/4-20 thread
35mm Dia. x 37mm high, threaded 1/4-20 (no stud supplied). Fits Oracle, Martin Logan, Mirage, Merlin, Apogee NHT and others.
|
$19.95 ea
|
Large Black Tenderfeet - 1/4-20 thread
35mm Dia. x 37mm high, threaded 1/4-20 (no stud supplied). Fits Oracle, Martin Logan, Mirage, Merlin, Apogee NHT and others.
|
$22.95 ea
|
Small Silver Tenderfeet 35mm Dia. x 15mm high
|
$12.95 ea
|
Small Black Tenderfeet 35mm Dia. x 15mm high
|
$15.95 ea
|
Silver Tendercup 35 mm Dia. - Accepts points of all spiked feet to protect floors - maintains single point contact
|
$12.95 ea
|
Black Tendercups 35 mm Dia. - Accepts points of all spiked feet to protect floors - maintains single point contact
|
$15.95 ea
|
Spike Feet I - This kit uses surface-mounted, circular, black, threaded steel mounting plates to secure the spikes. Kit includes eight 6mm black spikes, nuts, surface mounting plates and mounting screw.
Kit includes eight 6mm black spikes, nuts flush mounting plate and mounting screws
|
$29.95 ea
|
Spike Feet II - This kit uses solid brass flush-mounted inserts to secure the spikes. A brad-point cabinet maker's drill bit and depth gauge are supplied with each kit. The drill bit produces perfect flat-bottom holes, without tearing up veneers or laminates. The rubber depth gauge is first set to produce a hole 1/2 inch deep to accept the brass insert, which is then pounded in with a hammer. The installed insert then sits flush with the surface.
This Kit includes eight 6mm black spikes, nuts and brass inserts. Brad point drill and drill stop included.
|
$29.95 ea
|
|
CARDAS ACCESSORIES
|
RCA C - Cardas RCA Caps (RCA C) fit over unused female RCA connectors in your system to eliminate EMI and RF noise absorption. Unlike traditional shorting plugs, these caps do not short the inputs (many pre amps do not like having their inputs shorted). Bag of 12 $53.50 free shipping
|
RCA C SS The Cardas Nautilus logo is displayed on these Signature Series RCA Caps (RCA C SS). These non-shorting, billet brass, nickel plated caps fit over unused female RCA connectors to shield against RFI, EMI, dust and corrosion. Box of 12 $56.50 free shipping
|
RCA C SP SS - Signature Series RCA Shorting Pin Caps (RCA C SP SS) can be used to short out an input RCA. This is desirable on some equipment to lower the noise floor. Some manufacturers ship them with their preamps. With the RCA SP SS the user can decide to either short or not short inputs. Generally outputs prefer not being shorted. Billet brass, nickel plated caps fit over unused female RCA connectors to shield against RFI, EMI, dust and corrosion. Set of 2 $11
|
XLR C SS - Signature Series Cardas XLR Caps fit over unused XLR connectors to eliminate EMI and RF noise absorption. They are non shorting and completely cover the XLR's opening with a solid shield of nickel and brass to prevent EMI and RFI from entering the chassis. XLR C SS caps are available in both male and female configurations. Set of 2 $32 free shipping
|
BNC C SS - Cardas BNC Caps (BNC C SS) fit over unused BNC connectors to eliminate EMI and RF noise absorption, dust and corrosion. They are non shorting and completely cover the BNC's opening with a solid shield of Nickel and billet Brass to prevent EMI and RFI from entering the chassis. The Cardas Nautilus logo is displayed on these Signature Series Caps. Set of 2 $15 free shipping
|
Cardas Contact Cleaner/Conditioner
1/3 oz. Cardas electrical contact conditioner for improved signal transfer at the contact interface.
Price $23.95 
|
IsoNode anti-vibration feet by Brightstar Audio
The IsoNode isolation feet provide the most cost-effective upgrade in the industry! Voted Product of the Year and Best of CES, the unique IsoNode polymer rejects a wide range of vibration trying to enter from underneath the component and contaminate the signal. The highly compliant IsoNode simultaneously acts as both a liquid and a solid for superior vibration control and isolation. Adhesive backing is included. Large size: 1.25 " X 3/4" tall, hold 42 lbs per set.Small size are 3/4" x 3/8" tall , hold 30 lbs per set. Place 4 IsoNodes underneath your CD, RECEIVER, DVD, DAC, TRANSPORT, etc. and hear the amazing difference in sound quality! $24.99/set of 4 LARGE $14.50/set of 4 SMALL 
|
VIBRAPODS,VIBRACONES
|
VIBRAPOD. Available in 5 sizes. Please view specs for you specific equipment.
The first 12 pieces $6 ea, price drops to $5 ea for 13 pieces or more...
|
VIBRAPOD CONE. 3/8" Chrome Stationary Ball (it doesn't roll) 1" tall, 1 5/8" Diameter. Up to 6 lbs is Optimal 10 lbs Maximum Weight Each. Designed To Work With VIBRAPOD Or by Themselves. CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrated, Turntables, Speakers. $8 ea. ( $7 ea. 12 or more) 
|
AudioPrism CD Black Light MKII AudioPrism's proprietary phosphorescence layer glows further to "bias" the laser, further reducing the effects of jitter. With CD Blacklight, music is more alive, neutral and detailed. Price $59.95 
|
BLU-TACK. A non-reactive, resistive damping mastic which behaves like a tacky, flexible, semi-liquid when being handled but like a solid at audio frequencies. It comes in thin flexible sheets that can be cut up or pulled apart as needed. It is used primarily between the top plate of loudspeaker stands and the bottom of loudspeakers. This mechanically couples the loudspeaker to the stands much like spikes would but without damaging the loudspeakers.
Price $15 1 package (2 oz. slab, 2 1/4" x 4 1/4") 
|
|
|
|