VPI
|
VPI - Dynavector 20X Special Cartridge
VPI Dynavector New custom made VPI/Dynavector 20X cartridge with 1mV output and threaded screw holes in the aluminum body is now available. Combining the speed of the low output with the richness and low noise of the high output makes the VPI/Dynavector a perfect combination. $850 
|
Picture
|
Description
|
Price
|
|
VPI debutes its 30th Anniversary "CLASSIC TURNTABLE"
The VPI “Classic Turntable” comes standard with the unipivot JMW-10.5i tonearm Special Edition in rigid mount mode. The “Classic Turntable” uses new VPI pure copper wire, a solid plinth with black oak or walnut finish (at no additional cost), a solid mounted AC synchronous motor, new cast aluminum platter, silent inverted bearing, and new isolator feet derived from the HR-X. The sound of the “Classic Turntable” is fast, clean, wide open, with deep powerful bass, and unequalled in speed stability. The “Classic Turntable” gives any turntable made regardless of price a serious "run for the money." Table and Arm $2500
|
Walnut or Black wood
$2,495
|
|
The VPI Scout II carries the basic idea of the Scout to a higher and more user friendly level. A new 12" diameter cast aluminum platter similar to the Classic's platter but 1 3/8" in thickness will be part of the Scout II design improvements. The arm on the Scout is excellent but is limited to higher compliance moving coils (above 12) or moving iron and moving magnet cartridges of higher compliance. The Scout II has a new higher mass tapered tonearm based on the very successful 12.7 arm, reduced in length but still having the full machined tapered arm tube and internal Delrin damping. This new JMW-9HM is a better match for all moving coil cartridges. The new arm has higher mass, greater damping, and works well with cartridges like the Shelter, Denon, and Grado. Table and JMW-9HM $2100
|
Scout II/Jmw-9T
$2,100
|
|
|
The Scout, in its two-year existence, has become the best-reviewed turntable! The lowest priced turntable in STEREOPHILE RECOMMENDED LIST
Scout with JMW 9 $1,795 or Scout with JMW 9 Signature arm $2,195
|
Scout /Jmw 9
$1,795
|
|
|
The Scoutmaster combines key features from several of VPI's most successful tables. It uses the Aries 3 platter and inverted bearing...
Scoutmaster II comes with CLASSIC 2” thick Aluminum platter
|
Scoutmaster II /Jmw-9T
$2,695
|
|
SUPER SCOUTMASTER (22WX14DX9)
Package SSM-Basic- JMW-9T, Dual Motor Flywheel, SDS, BLACK Ring Clamp. The SSM comes with everything you need to play your records at the state of the art. The only option is the Mini-TNT feet, everything else is standard.
The SSM Reference is only available with the JMW 10.5i Tonearm, textured black motor housing, and the 26 lb. super platter.
|
SSM Basic
$3,995
SSM Reference
$7,995
|
|
VPI - The Aries 3 Turntable
* 2008 - Enjoy the Music.com - Best of 2008 - Aries 3
The ARIES 3 is the perfect choice for those who want near-HR-X performance Iin a smaller scale.
|
Aries 3
$2,995
Aries 3 /Jmw10.5i $4,995
|
|
* 2008 - Secrets of Home Theater and High Fidelity - High End Turntables
* 2007 - Golden Ear Award TAS
* 2006 - Stereophile Analog Product of the Year runner-up to $100,000.00 turntable
* 2006 - Stereophile Class A
* 2004 - Italy - GammaDelta - Top Awards
* 2004 - Golden Ear Award TAS
*HRX Air, SDS, Dual Motor/Flywheel, 2” THICK PLATTER, RING, WEIGHT with 12.7 arm
|
*HRX
$11,995
HRX Rim Drive
$12,995
|
|